I/M programs have been adopted in over 30 states to address air quality and environmental concerns by requiring mandatory motor vehicle emissions inspections to ensure vehicles are properly maintained. The federal Clean Air Act requires the implementation of approved I/M programs in areas with demonstrated poor ozone or carbon monoxide air quality issues (nonattainment areas). Light-duty vehicle I/M programs are very cost-effective in achieving carbon monoxide, nitrogen oxides, and hydrocarbon reductions. Heavy-duty diesel vehicle (HDDV) I/M programs are designed to reduce smoke emissions.
I/M programs are jointly administered by DEC and the New York State Department of Motor Vehicles (DMV). As the result of different air quality designations across the state and federal I/M regulation, the State has been geographically divided into two "I/M areas." The downstate New York Metropolitan Area (NYMA) is comprised of nine counties: Suffolk, Nassau, Kings, Queens, Richmond, New York, Bronx, Westchester and Rockland. The Upstate I/M area is comprised of the remaining 53 counties of the State.
DEC is responsible for ensuring that inspection stations are in compliance with regulations under 6 NYCRR Part 217 and that the equipment and software utilized for the tests are approved and certified. DEC monitors the program to achieve the emission reductions needed to fulfill the federal requirements. DEC may initiate changes to State regulations in response to changes in federal requirements, issues raised by the public, or at the direction of the State legislature.
New York Vehicle Inspection Program (NYVIP)
Statewide, most light-duty vehicles (passenger cars, vans, pick-up trucks) are required to have an emissions inspection through NYVIP. NYVIP was initially phased into the Upstate I/M area in 2004 and later expanded into NYMA in 2005. NYVIP features on-board diagnostic (OBD II) inspections. The latest update to NYVIP (NYVIP3) also incorporates smoke opacity testing at official diesel emission inspection stations (ODEIS), effective December 1, 2023.
Annual Emissions Testing
The NYVIP3 program requires inspections annually and when the vehicle changes ownership.
Exemptions
a) Electric-powered vehicles, motorcycles, vehicles with historic and farm registrations;
b) Diesel-powered vehicles greater than 8,500 lbs. GVWR (Gross Vehicle Weight Rating) registered Upstate;
c) OBD and low enhanced age-based exemptions:
- Vehicles 25 model years and older (for example, during calendar year 2024, model year 1999 and older vehicles are exempt from OBD and low enhanced emissions inspections).
- Vehicles two model years and newer (for example, during calendar year 2024, model year 2023 and 2024 vehicles are exempt from OBD and low enhanced emissions inspections)
- Additional heavy-duty diesel exemptions listed in 6 NYCRR Subpart 217-5.
Most vehicles exempt from emissions testing are still subject to the annual safety inspection requirements.
Emissions Test Types - NYMA
- NYVIP3 OBD II:
Non-diesel and diesel vehicles, model years newer than 25 years (for example, during calendar year 2024, model year 2000 and newer vehicles), 8,500 lbs. or less GVWR.
(Note the “new” vehicle age-based emissions inspection exemption above)
- NYVIP3 Low Enhanced: Gas cap presence and anti-tampering visual checks for:
Non-exempt gasoline vehicles, model years newer than 25 years (for example, during calendar year 2024, model year 2000 and newer vehicles), between 8,501 lbs. and 18,000 lbs. GVWR.
(Note the "new" vehicle age-based emissions inspection exemption above)
- NYVIP3 Heavy-Duty Diesel Opacity Test: Diesel-powered vehicles greater than 8,500 lbs.
- The New York City Taxi and Limousine Commission requires safety and OBD II inspections of applicable taxicabs and for-hire vehicles.
Emissions Test Types - Upstate
- NYVIP3 OBD II:
Non-diesel and diesel vehicles, model years newer than 25 years (for example, during calendar year 2024, model year 2000 and newer vehicles), 8,500 lbs. or less GVWR.
(Note the “new” vehicle age-based emissions inspection exemption above)
- NYVIP3 Low Enhanced: Gas cap presence and anti-tampering visual checks for:
Non-exempt gasoline vehicles, model years newer than 25 years (for example, during calendar year 2024, model year 2000 and newer vehicles), between 8,501 lbs. and 18,000 lbs. GVWR.
(Note the “new” vehicle age-based emissions inspection exemption above)
Emissions Test Fees (do not include safety inspection fees)
- NYMA:
- NYVIP3 OBD II - $27.00, NYVIP3 low enhanced - $11.00
- NYVIP3 Heavy-Duty Diesel - $25.00
- Upstate:
- NYVIP3 OBD II - $11.00, NYVIP3 low enhanced - $11.00
Additional reinspection fees may apply to vehicles that fail. These fees vary depending on the reinspection requirements.
Waivers
NYVIP3 allows for a repair expenditure waiver of the emissions inspection for failing OBD II inspections. Documented costs must exceed $450 for qualifying repairs following the initial failed inspection.
For HDDV I/M, NYVIP3 allows for minimum hardship waiver repair costs based on vehicle GVWR, as established in 6 NYCRR Subpart 217-5.
Warranties and Emissions-Related Repairs
The best source of information related to warranty coverage is the vehicle's owner's manual or warranty booklet. Emissions-related repairs are covered under a federal emissions warranty for the first 2 years or 24,000 miles (whichever comes first). Additional warranty coverage is required for the major emissions components, including the powertrain control module (computer) and catalytic converter, for up to 8 years or 80,000 miles (whichever comes first). Extended warranties may also apply.
Vehicles Registered Outside New York State
A New York State emissions inspection may be administered to vehicles registered in other states. We recommend you first confirm with the other state's applicable agency that they will accept a New York State safety/emissions inspection. To receive a NYVIP safety/emissions inspection without a New York State registration document, the inspector will be required to either scan the vehicle's "VIN plate" or to manually enter the 17-character vehicle identification number (VIN) into the program. If your vehicle passes the NYVIP3 safety/emissions inspection (low enhanced, OBD II), you should request the vehicle inspection receipt (VIR) from the inspector. You will be required to provide the other state agency with the VIR to document a "passing" New York State inspection.
New York State Registered Vehicles Outside New York State
New York State does not accept emissions tests conducted outside of the state. If your vehicle is registered in New York State, but you are living out-of-state (e.g., college), you may get an extension when you return to New York State by contacting DMV.
Onboard Diagnostics (OBD II)
OBD II is a computer-based system installed in vehicles manufactured after 1996 that monitors the performance of a vehicle's powertrain (engine, transmission) and emission control systems. It also alerts the driver of an engine management or emissions control issue by illuminating the malfunction indicator light (MIL) on the vehicle's dashboard. When lit, it may be red, amber, or yellow and may read "Check Engine," "Service Engine Soon," or simply be an image of an engine. Responding to the MIL in a timely fashion can improve fuel efficiency, enhance your vehicle's performance, and protect the environment by reducing vehicle emissions. OBD II can assist technicians identify and repair problems by storing a "trouble code" and "freeze frame" data for the malfunction. While newer OBD II vehicles are designed and manufactured to meet cleaner emissions standards, their emissions will only remain low if these vehicles are properly maintained.
Certain severe engine malfunctions may cause the MIL to blink or flash on and off. These conditions require a reduction in speed and immediate service. Consult your owner's manual for further guidance.
A loose gas cap may cause the MIL to turn on. Most OBD II vehicles complete a series of manufacturer-defined diagnostic checks for evaporative gas leaks. A broken gas cap, or a gas cap not completely tightened, can cause the MIL to light. If you believe the gas cap was not completely fastened, simply retighten the cap.
There may be cases where the MIL goes out before any repairs are made. If the condition that initially caused the MIL to light has been addressed (for instance, a loose gas cap was tightened), the OBD II system is capable of turning the MIL off. This sequence of MIL on/MIL off does not indicate a defective OBD II system. Your vehicle needs no special attention unless the MIL comes on again.
Do not disconnect the battery in an attempt to bypass the OBD II. This will lead to an inspection failure.
A vehicle presented for an official NYVIP3 OBD II inspection with an illuminated MIL will fail the emissions inspection. Do not wait until the end of your current inspection sticker to have your vehicle inspected. Your repair technician needs adequate time to diagnose and repair the vehicle.
NYVIP3 OBD II Inspection
New York State requires annual NYVIP3 OBD II emissions inspections for applicable non-diesel and non-electric vehicles under NYVIP3. Model years newer than 25 years (for example, 2000 and newer for calendar year 2024) light-duty diesel vehicles are subject to OBD II. The OBD II inspection requires connecting approved inspection equipment to the vehicle's OBD connector to download emissions system information.
OBD II inspections take less time to complete than traditional tailpipe based inspections and are capable of evaluating evaporative emissions problems (i.e., leaks from hoses) that are not possible for older, pre-OBD II vehicles.
The complete NYVIP3 OBD II inspection includes:
- Safety inspection;
- Visual inspection of the emission control devices (including the gas cap); and
- OBD II inspection.
The NYVIP3 inspection involves two visual inspections followed by retrieving the electronic data from the vehicle's on-board computer. The visual inspections include safety components and emission control devices, such as the gas cap and MIL. The OBD II pass/fail determination is based on the visual inspections and the data retrieved. The inspection equipment will print a VIR that details the results of the inspection. You can request this document from the inspector.
If your vehicle passes the inspection, you will receive an inspection sticker that is affixed to the vehicle's windshield. If your vehicle fails the inspection, the VIR will list the reason(s) for the failure. The VIR can also provide useful information to a qualified automotive repair technician if your vehicle requires a repair.
What to do if your vehicle fails its inspection
Your vehicle must pass a reinspection or receive an emissions-related waiver (see below) in order to receive a valid inspection sticker. In most cases, the vehicle will need to be repaired. Failure to pass the inspection by the expiration of the current inspection sticker will leave you subject to fines and possibly registration denial.
If your vehicle failed for the readiness evaluation, it means that the inspection equipment communicated with the vehicle and the vehicle reported that it had not completed a sufficient number of on-board diagnostics. The vehicle will need to be driven until a sufficient number of diagnostics are run to completion. Motorists receiving a 10-day extension should be cautioned that this extension is for one time only. The vehicle should be driven for several days to set monitors and then be reinspected. NYVIP has additional information on readiness failures.
NYVIP3 OBD II Inspection Emissions Waivers
Vehicles subject to the NYVIP3 OBD II inspection may qualify for a waiver if all of the following conditions are met:
- the vehicle fails only the OBD II emissions test portion of the inspection (i.e., the vehicle must pass the safety, gas cap check, and emission control device visual checks);
- the vehicle receives repairs related to the reason(s) for the OBD II emissions failure;
- the vehicle fails the OBD II inspection at least twice during its current inspection cycle (i.e., an initial inspection and at least one reinspection); and
- qualifying repairs must be documented and must total at least $450.
Emissions-related repair costs may be covered under the vehicle manufacturer's warranty. Warranty coverage varies depending on what components require repair, vehicle age, mileage, and the individual vehicle manufacturer's warranty provisions.
The federal Clean Air Act requires an 8-year or 80,000 mile warranty on the major emissions control components, such as the catalytic converter, and a 2-year or 24,000 mile warranty on other emissions control components. Owners are advised to read the warranty provisions within their owner's manual or warranty booklet.
HDDV I/M Program
HDDVs play a major role in commercial transportation and operate across the State, but diesel exhaust has the potential to cause serious health problems. In an effort to reduce potentially harmful diesel exhaust emissions, DEC has developed a program to inspect HDDVs and ensure their emission control systems are being properly maintained. DEC has two emission inspection programs for HDDVs:
- An annual emission inspection program for HDDVs registered in NYMA.
- A roadside emission inspection program for HDDVs operating on roadways in the State.
HDDVs are diesel engine-powered vehicles with a GVWR exceeding 8,500 pounds. Some vehicles in this weight class are exempt, such as authorized emergency vehicles. Both the annual and roadside emission inspections are conducted by a certified inspector. The emission inspections can include a visual inspection to verify that the vehicle's emissions control equipment is functioning, a check for tampering, and an opacity (smoke) test using an approved opacity meter (smoke meter).
Annual Inspections
The annual HDDV emissions inspection is performed at the time of the vehicle's annual DMV safety inspection. This emissions inspection applies only to HDDVs registered in NYMA and must be performed by a certified inspector. A vehicle safety inspection station that performs emissions inspections of HDDVs is authorized by DMV as an ODEIS.
As of December 1, 2023, only NYVIP3 may be used for HDDV I/M opacity inspections conducted at ODEIS.
Roadside Inspections and Standards
Roadside emissions inspections are performed at various times on roadways by State-certified staff. DEC staff who are certified emission inspectors have the authority to emissions test (smoke opacity test) HDDVs. An HDDV can be roadside inspected regardless of the vehicle's registration location.
Smoke opacity tests measure the opacity of exhaust smoke from the vehicle. Opacity is a measure of the amount of light that cannot pass through a substance, such as the amount of light obstructed as it passes through the exhaust. It is expressed as a percentage. These tests are conducted using an opacity meter, which samples the exhaust smoke at frequent intervals and calculates the smoke coming from the tailpipe. The exhaust smoke will be tested with an approved opacity smoke meter using a snap acceleration test.
- The wheels will be chocked.
- The transmission will be in neutral.
- The brakes will be disengaged to activate all emission control equipment.
- The sensor will be inserted at the end of the exhaust stack.
- The accelerator is rapidly depressed and held for a few seconds, then released. This is repeated a minimum of five times.
- The meter will average three consistent results and create a print-out for your records.
The smoke opacity standards, by engine model year, are:
- 1991 or newer - greater than 40%
- 1974-1990 - greater than 55%
- 1973 or older - greater than 70%
To reduce the time it takes to complete an inspection, have the following information readily available:
- Make and year of vehicle
- Mileage
- Engine manufacturer
- Horsepower
Improving Smoke Opacity
It is important to maintain and repair a vehicle to ensure it passes the emissions test. Common causes of excessive smoke include:
- Clogged or worn fuel filters
- Restricted air filters
- Contaminated fuel
- The oil level is overfilled
- Defective turbochargers
- Defective or inoperable emissions control devices
Smoke opacity can be improved in several ways:
- Adjusting emissions control equipment
- Replacing air filter elements
- Tuning up your engine
- Adjusting engine timing
- Ensuring correct operation of the cooling system
- Repairing the restricted exhaust system
Penalties for Failing Inspections
No vehicle will be put out of service for failing a roadside opacity test. However, HDDVs found in violation are subject to penalties as noted in 6 NYCRR Subpart 217-5. Penalties can be reduced if the violation is corrected within 30 days.
A retest, which may be done to seek a penalty reduction, must be conducted by an ODEIS. The roadside and/or annual inspection penalties do not apply to school buses or municipally owned HDDVs for a first violation, provided the vehicle is repaired and the violation corrected within 30 days of the cited violation.
DEC Approved Smoke Meters
As of December 1, 2023, only the NYVIP3 integrated computerized vehicle inspection system (CVIS) may be used for NYS HDDV I/M inspections conducted at ODEIS. Previously approved opacity meters may no longer be used for NYS HDDV I/M inspections.
Contact:
Opus Inspection
98 Niver St.
Cohoes, NY 12047
Phone: (1-866-OBD-TEST)
CAP3030
Enhanced I/M Program Reports
EPA Annual Reports
New York State has operated a statewide, enhanced OBDII I/M program since 2005. Data analysis and annual reporting provides for proper program monitoring and evaluation. The contents of the annual reports listed below are based on EPA regulations under 40 CFR Part 51.366, Data Analysis and Reporting and New York State Implementation Plan revisions. These reports are prepared annually through a coordinated effort between DEC and DMV. Entire reports are available in downloadable PDF format.
2022 Enhanced I/M Program Annual Report
2021 Enhanced I/M Program Annual Report
2020 Enhanced I/M Program Annual Report
Biennial Program Evaluation Reports
New York State submits biennial program evaluation reports to EPA. These ongoing reviews meet federal reporting requirements under 40 CFR Part 51.353(c), Program Evaluation. Entire reports are available in downloadable PDF format.
Enhanced I/M Program Evaluation Report - July 2020 - June 2022
Enhanced I/M Program Evaluation Report - June 2018 - June 2020
